1.
Plug the dishwasher into a wall outlet. Slowly turn on the water supply to full pressure.
- When you turn on the water supply, the inlet hose will be pressurized.
2.
Load dishwasher and add detergent/rinse aid.
3.
Turn power on and press the washing program button to select your desired washing program.
4.
Press start to begin the washing program.
- You can change the washing program if the wash cycle is just starting. Press and hold the washing
program button to enter standby and select a different program.
5.
Do the following to add an item during a washing program:
- Press the pause button, wait for operation to stop, then open the door and add the item.
- Close the door and press the start button to continue washing.
6.
Machine will sound and automatically stop after the washing program finishes.
7.
When finished, turn off the appliance and shut off the water supply.
8.
Press and hold the pressure relief valve to release pressure from the inlet hose. Continue until water
stops flowing.
-
Warning:
Water may be very hot; take care when releasing pressure.
9.
Remove the quick connect adaptor and faucet adaptor.
10.
Partially open the door to circulate air inside the dishwasher. Allow items to cool for 15 minutes, then
remove them from the appliance.
- Do not immediately remove items from the dishwasher after washing.
WASHING
PROGRAM
DESCRIPTION
SPECIFICATIONS
DETERGENT
TIME
RINSE AID
For normally
soiled loads
For heavy
soiled loads
Pre-wash (2),
Wash (2),
Rinse (2),
Dry
Pre-wash (2),
Wash,
Rinse (2),
Dry
Pre-wash (2),
Wash,
Rinse (2),
Dry
Pre-wash,
Wash,
Rinse (2),
Dry
Pre-wash (2),
Wash,
Rinse (2)
Pre-wash,
Wash
For lightly
soiled loads
For lightly
soiled glass and
tableware
For rinsing
items that will
not be washed
immediately
A short wash for
lightly soiled
loads without
drying
0.5 oz.
0.6 oz.
0.6 oz.
0.6 oz.
0.5 oz.
70 min.
45 min.
24 min.
110min.
100 min.
75 min.
–
YES
YES
YES
YES
YES
NO
HEAVY
NORMAL
ECONOMY
GLASS
SPEED
RINSE
SETTINGS
|
11
