•
Add clean water directly to the basin. Make sure you do not go beyond the max water line.
•
Do not immerse the machine completely in water.
•
Remove water by draining water through the external drain pipe or carefully pouring it
from the basin.
•
Prevent water from splashing on the control panel or it may damage the components.
•
Place machine on level surface before use.
•
Recommended use is twice a day (morning and evening) for 30 minutes at a time with a
water temperature of 108°F.
•
Be aware that during a foot bath massage your pores will open, so do not use while sitting
directly in front of a fan or air conditioner to avoid getting a cold.
•
It is recommended that you drink a cup of water before use.
•
Empty and wipe accumulated dirt from the inside of the basin after every use.
•
It is recommended to use this product one hour before or after a meal.
•
Do not stand up immediately after a foot bath massage; rest 2 to 3 minutes before
standing up and walking.
Pg. 6
ADDING WATER
FOOT SPA MASSAGER TIPS
TROUBLESHOOTING
Reason
Incrustation
No power
Not turned on
Foot bath time is up
Temperature is too high
Problem
Not working or
stopped working
Heat not working
Water is heavy or dirty
Solution
Soak the basin in oxalic acid or white
vinegar for 10 minutes
Make sure the machine is properly
plugged in and turned on
Turn on
Add time or restart foot bath
Add cold water to the basin to lower the
temperature
