Pg. 5
•
Mark the location where the screws will go on the wall. NOTE: Do not affix this appliance at a height
lower than 1 ft. from the floor (at least 2 ft. recommended), or higher than 3.5 ft. from the ceiling.
•
Drill the holes for the screws with a No. 6 drill bit.
NOTE: It is recommended to use a level to ensure holes are drilled at an even height.
Insert five part 3 wall anchors into the
drilled holes.
Attach the part A wall bracket to the wall
anchors with five part 2 screws.
Carefully lift and secure the part B
heater to the wall bracket, ensuring
the top ledge of heater connects with
and is centered with the wall bracket.
Attach the sides of the wall bracket to
the heater with two part 1 screws, one
on each side.
WALL
WALL
TOOLS REQUIRED
WALL MOUNT ASSEMBLY
1
2
A
3
2
B
1
1
