PROPANE TANK WARNINGS
•
Make sure to organize fuel hose to prevent accidental tripping.
•
Only use standard 20-pound propane tanks.
•
Maximum gas supply pressure is 250 PSI.
•
Do not fill tank more than 80% of its capacity.
•
Do not use tank if any part of it is damaged; rust and dents can be dangerous.
•
Propane tank must have a collar to protect the gas valve.
•
Using too much propane gas may result in gas pooling and will not burn.
•
Check for leaks by brushing a mixture of soap and water on all connections. If large bubbles form when
gas is turned on, there may be a leak.
•
If you smell gas:
- Do not attempt to light appliance.
- Extinguish flames and disconnect tank.
- Move people away from the immediate area.
•
Do not try to repair leaking tank. Contact a professional to repair or replace tank.
HARDWARE
1
8 PCS
M6 x 20mm
SCREW
M6 x 30mm
SCREW
M8 x 16mm
SCREW
2
4 PCS
3
4 PCS
TOOLS REQUIRED
APPROXIMATELY
45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
M6 WASHER
4
8 PCS
5
4 PCS
M8 WASHER
TANK STRAP
6
1 SET
ALLEN WRENCH
(PROVIDED)
WRENCH
(PROVIDED)
4
|
1 AAA BATTERY
(PROVIDED)
+
AAA
-
