STEP 1:
Use two part 5 screws, one part 3 washer,
and one part 10 pad to attach one side of the sup-
port frame to the base of the treadmill.
Repeat this on the other side with two more part 5
screws, a part 3 washer, and a part 10 pad to fully
attach the support frame to the treadmill.
STEP 3:
Insert the part 8 safety key into the desig-
nated slot on the part 4 display monitor.
STEP 2:
Use two part 5 screws and two part 10
pads to attach the handrail to the support frame.
Make sure that the screws do not interfere with the
electric wires within the support frame.
Place the two part 7 cup holders in the designated
slots next to the display monitor
.
STEP 4:
Screw the part 1 knob into the left railing
of the support frame.
Use the part 6 knob to attach the left side of the
support frame to the base of the treadmill.
6
1
8
4
10
7
10
5
5
5
3
3
bestchoiceproducts.com
