51
4. BIOS Setup
4.8.11 Event Log Capacity
This is to pre-set space in BIOS for error messages loading.
4.8.12 Event Log Validity
This is to confirm the safety of the space for error record.
4.8.13 Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
4.8.14 Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer) port.
4.8.15 Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Select Normal unless your
hardware and software require one of the other modes offered in this field.
SPP
Standard parallel port mode (Default)
EPP
Bi-directional mode
ECP
Fast, buffered
ECP+EPP
Bi-directional and buffered
4.8.16 Parallel Port EPP Type
Select EPP port type 1.7 or 1.9. The choices: EPP 1.7, 1.9
4.8.17 PS/2 mouse function
Select Enabled or Disabled to set up your PS/2 mouse.
4.8.18 USB Controller
Select Enabled if yours system contains a Universal Serial Bus (USB) controller. The
choice: Enabled, Disabled.
4.8.19 USB Keyboard Support
This is to select if the system is going to support USB keyboard or not.
4.8.20 Init Display First
This item allows you to decide to active whether PCI Slot or AGP first. The choices: PCI
Slot, AGP.
