manualshive.com logo in svg

BCM IN810EP, User Manual, Page: 45 / 57

Share
Download
BCM IN810EP User Manual Download Page 45

45

4. BIOS SETUP

4. BIOS SETUP

system memory on the motherboard.

CPU MicroCode Updation

Set this option to 

Enabled

 to permit the CPU to be updated online at any time.

System BIOS Cacheable

When set to 

Enabled,

 the contents of the F0000h system memory segment can be read

from or written to cache memory. The contents of this memory segment are always
copied from the BIOS ROM to system RAM for faster execution.

C000 Shadow (64K)

These options specify how the 64 KB of video ROM at C0000h is treated. The settings
are:

Setting

Description

Disabled

The contents of the video ROM are not copied to RAM.

Enabled

The contents of the video ROM area from C0000h – C7FFFh

are copied (shadowed) from ROM to RAM for
faster execution.

Cached

The contents of the video ROM area from C0000h – C7FFFh

are copied from ROM to RAM and can be written
to or read from cache memory.

D000 Shadow (64K)

These options enable shadowing of the contents of the ROM area named in the option.
The ROM area not used by ISA adapter cards is allocated to PCI adapter cards. The
settings are:

Setting

Description

Disabled

The contents of the video ROM are not copied to RAM.

Cached

The contents of the video ROM area from C0000h – C7FFFh

are copied from ROM to RAM and can be written
to or read from cache memory.

Enabled

The contents of the video ROM area from C0000h – C7FFFh

are copied (shadowed) from ROM to RAM for
faster execution.

Summary of Contents for IN810EP


























































Reviews:

No comments