SQ596
18
Connectors
Keyboard port(J9)
This port is for a PS/2 compatible keyboard interface.
Keyboard Port
Keyboard Port
(Lower)
PS/2 Mouse Port (J10)
This SQ596 mainboard provides a default 6 pin female PS/2 compatible mouse interface
port.
Mouse Port
PS/2 Mouse port
(Upper)
Parallel Port Connector (26-pin Block) (J19)
This is a bi-directional parallel port (EPP/ECP compatible). The parallel port is capable of
being disabled or remapped to either the secondary LPT address of the primary LPT address
through BIOS if other parallel ports are installed. The parallel port contains 12mA source
output drivers on the drive interface and incorporates Chip Protect circuitry for protection
against damage due to printer’s power being on.
Parallel Port Connector
J 1 9
WARNING:
When you connect a ribbon cable to this port, you must orient the cable
connector so that the PIN 1 edge of the cable is at the PIN 1 end of the on-board port
