MX945GM-D
15
2-7-7 Floppy Drive Connector: FDD1
The MX945GM-D provides a standard floppy drive connector that supports 1.44M floppy disk
types.
JUMPER
2-7-8 Clear CMOS Jumper: CLR_CMOS1
There is a CMOS RAM onboard which as a power supply from external battery to maintain
the system configuration data. When it is necessary to clear the system configuration, use Clear
CMOS jumper (CLR_CMOS1) to clear data. Follow the instructions below to clear the data:
NOTE: The CMOS can be cleared by shorting pin 2-3 at least 30 seconds while the system is
OFF. Then return the pin connector back to pin 1-2. Avoid clearing the CMOS while the
system is on, this may damage the mainboard.
