BCM Advanced Research MX370QD, User Manual

Page: 33 / 82

MX370QD User’s Manual
MX370QD User’s Manual 33

Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate. Maximum current limit is 10A .

Make sure that your power supply unit (PSU) can provide at
least the minimum power required by your system.
1.7.5 Serial Port connectors (COM1~2)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
1.7.6 Serial ATA Connector (SATA1~2 )
SATA 1~2 support SATA 3.0. These connectors are for the Serial ATA signal cables for
Serial ATA hard disk drives.