BCM Advanced Research MX370QD, User Manual

Page: 23 / 82

MX370QD User’s Manual
MX370QD User’s Manual 23
1.4.2 Installing a DDR4 SODIMM
Make sure to unplug the power supply before adding or removing
SODIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
1. Locate the SODIMM socket on the board.
2. Hold two edges of the SODIMM module carefully, and keep away of touching its
connectors.
3. Align the notch key on the module with the rib on the slot.
4. Firmly press the modules into the socket which will automatically snap into the mounting
notch. Do not force the SODIMM module in with extra force as the SODIMM module only
fits in one direction.

The DDR4 SODIMM sockets do not support DDR/DDR2/DDR3
SODIMMs. DO NOT install DDR/DDR2/DDR3 SODIMMs to the
DDR4 SODIMM socket.
1.4.3 Removing a DDR4 SODIMM
1. Press the two ejector tabs on the slot outward simultaneously, and then pull out the
DIMM module.
Support the SODIMM lightly with your fingers when pressing the ejector
tabs. The SODIMM might get damaged when it flips out with extra force.
ejector