46
4. BIOS Setup
4.6.5 Access
While choosing Monitor, an event occurring on each device listed below for monitoring:
Ø
Keyboard and PS/2 Access
Ø
DFC/LPT/COM Ports Access
Ø
MIDI Ports Access
Ø
Primary/Secondary Master IDE Access
Ø
Primary/Secondary Slave IDE Access
Ø
PIRQ[A]-[D] IRQ Active
4.6.6 Power Button Mode
This option specifies how the power button mounted externally on the computer chassis is
used. The settings are:
Setting
Description
On/Off
Pushing the power button turns the computer on or off.
Suspend
Pushing the Power button places the computer in Suspend
mode or Full On power mode.
4.6.7 Restore on AC/Power Loss
This option is used to reboot system after power has been interrupted.
Power Off
leaves the
system off and
Last State
reboots the system.
4.6.8 Resume On Ring Header
This option allows either settings of “
Enabled”
or “
Disabled”
for powering up the computer
when the modem receives a call while the computer is soft-off mode.
Note: The computer can not receive or transmit data until the computer and applications are
fully running, thus connection can not be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that will also
cause the system to power on.
4.6.9 Resume On LAN Header
Wake-On-Lane allows your computer to be booted from another computer via a network by
sending a wake-up frame or signal.
Summary of Contents for DR742e
Page 1: ...Advanced Socket 370 Motherboard DR742e User s Manual...
Page 8: ...8 Contents...
Page 10: ...10 1 Introduction...
