39
4. BIOS Setup
4.3.3 Drive A/B type
Select the correct specifications for the diskette drive(s) installed in the computer.
None
No diskette drive installed
360K, 5.25 in
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in
5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5 in
3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1.44 megabyte capacity
2.88M, 3.5 in
3-1/2 inch double-sided drive; 2.88 megabyte capacity
4.3.4 Primary/Secondary IDE Master/Slave
Not Installed
No diskette drive installed
1 to 46
Drive types 1 through 46 with preprogrammed values
User
Enter values into each drive parameter field manually
Auto
Detect HDD type automatically
ATAPI CDROM
Use for ATAPI CD-ROM drives
The BIOS supports up to four IDE drives. This section does not show information about
other IDE devices, such as a CD-ROM drive, or about other hard drive types, such as SCSI
drives.
NOTE: We recommend that you select type AUTO for all drives.
The BIOS can automatically detect the specifications and optimal operating mode of almost
all IDE hard drives. When you select type AUTO for a hard drive, the BIOS detects its
specifications during POST, every time the system boots.
If you do not want to select drive type AUTO, other methods of selecting the drive type are
available:
1.
Match the specifications of your installed IDE hard drive(s) with the preprogrammed
values for drive types 1 through 45.
2.
Select USER and enter values into each drive parameter field.
Summary of Contents for DR742e
Page 1: ...Advanced Socket 370 Motherboard DR742e User s Manual...
Page 8: ...8 Contents...
Page 10: ...10 1 Introduction...
