BC Biomedical DPM-2001, User Manual

Page: 19 / 27

18
The Upload command allows the user to read all of the selected device data from locations
1 through 18 with a single command. The data will be transmitted as a single block with
each location separated by a carriage return, linefeed ($0D,$0A).
The following is the format for this command:
U (Return)
See the table in the Read Command section for details on the data structure.
QUICKSEND COMMAND
Quicksend is a feature that allows the user to receive an automatic update of all of the
meter data without any user interaction. When the Quicksend feature is turned ON, the
meter will automatically send all of the device data every half second. The Quicksend
feature is toggled ON and OFF with the Quicksend command.
The following is the format for the 'Q' command:
Q (RETURN)
See the table in the Read Command section for details on the data structure.
UPLOAD COMMAND