8
Specifications
Preamplifier section
Line level inputs (LINE 1 to LINE 4)
Sensitivity: 200 mV
Impedance: 50 pF kOhms/100
Maximum input level: 7 V
Corrections
Bass (± 10 dB at 100 Hz)
Treble (± 10 dB at 10 kHz)
Amplifier Section
Continuous average power into 8 ohms: 2 x 100 W
Continuous average power into 4 ohms: 2 x 150 W
Distortion: 0.01% (20 Hz - 20 kHz)
Signal / noise ratio: 100 dBA
Digital-to-analog converter
The interface is entrusted to a Cirrus Logic CS8416 chip and the
digital-analog conversion is supported by a PCM1973 circuit
from Texas Instrument. The DAC is compatible with digital
signals up to 24bits/96kHz from coaxial and optical inputs.
Phono input
Input impedance: 47 KΩ / Gain: 45dB
Frequency band (± 0.2dB of RIAA) : 10Hz - 60KHz
Distortion (1kHz, 1W, 8Ω) < 0.003%
Connectors Front side
1x Headphone output (jack 6.35mm)
Connectors Rear side
4x Line inputs (LINE 1 to LINE 4 with AV BYPASS)
1x Phono input (on LINE 3) with PH BYPASS button
2x Optical inputs
2x Coaxial inputs
1x WIRELESS antenna
1x PRE-OUT and MAIN-IN
1x REC output
4x Speaker terminals screw-compatible banana plugs
1x AC power input
Included accessories
1x Detachable power cord
1x WIRELESS antenna
1x Remote control RC-EX4
2x Batteries (AAA) for remote control
1x Manual guide
General
UNIT
Dimensions (W×H×D): 430 x 111 x 461 mm / Weight: 11.8 kg
BOX
Dimensions (W×H×D): 520 x 200 x 560 mm / Weight: 14.1 kg
EX-242 EAN CODE: 0634654606211
Specification and appearance are subject to change without notice. Weight and
dimensions are approximate. Illustrations in this manual might differ slightly
from production models.
