7
ENGLI
SH
Preamplifier secon
Line level inputs (CD, Tuner, Aux1, Aux2)
Sensivity: 200 mV
Impedance: 50 pF kOhms/100
Maximum input level: 7 V
Correcons:
Bass (± 10 dB at 100 Hz)
Treble (± 10 dB at 10 kHz)
Amplifier Secon
Connuous average power into 8 ohms: 2 x 40 W
Connuous average power into 4 ohms: 2 x 70 W
Distoron: 0.02% (20 Hz - 20 kHz)
Signal / noise rao: 95 dB (1W)
Connectors
Front side
1x Headphone output (jack 6.35mm)
1x MP3 input (jack 3.5mm) for portable audio player
Connectors Rear side
4x line inputs (CD, Tuner, Aux1, Aux2)
1x Opcal Input
1x Coaxial Input
Speaker terminals screw-compable banana plugs
General
Detachable power cable
UNIT
Dimensions (W×H×D) with stand: 430 x 80 x 320 mm
Weight: 6.1 kg
Dimensions (W×H×D) without feet: 430 x 70 x 320 mm
Weight: 6.1 kg
BOX
Dimensions (W×H×D): 480 x 125 x 356 mm
Weight: 6.9 kg
Volume: 0.022 m
3
EX202 EAN CODE: 0661799078214
Here you will find a number of fault descripon and
possible soluons we invite you to read in order to ensure
the possibility of an actual breakdown of your device.
The unit does not turn on
- Make sure the power cord is properly connected.
- Make sure the plug is fully inserted into the wall outlet
and there is power.
- Make sure the camera is turned on.
- Check the fuse in the mains plug or adapter if necessary.
There is no sound
- Make sure the unit is not in standby mode.
- Check that the source component is connected properly.
- Make sure your speakers are properly connected.
One channel no sound
- Make sure the balance control is in the correct posion.
- Check the speaker connecons.
- Check interconnects.
A loud humming or buzzing is noceable
- Check turntable or tonearm to capture an ground fault or
a faulty connecon.
- Make sure that interconnect cable is loose or defecve.
- Make sure your tape deck or turntable is not too close to
the amplifier.
The bass is weak or the stereo image is diffuse
Make sure the speakers are not in phase.
The sound is distorted
Make sure that the control sengs of volume or tone is not
too high.
The remote control does not work
- Check that the baeries have not expired.
- Make sure nothing is blocking the remote sensor.
In case the above soluons do not remedy your problem,
check our FAQ secon (Frequently Asked Quesons) on our
website: www.bc-acousque.com
For repair, during or aer the warranty, please contact your
dealer.
To obtain warranty service and technical support, thank you
kindly to register your product online on the website
www.bc-acousque.com at the product registraon
secon.
BC ACOUSTIQUE
BP 306
94709 Maisons-Alfort Cedex - France
www.bc-acousque.com
Specificaons
Troubleshoong
Troubleshoong
