4
- Some countries do not allow the exclusion or limitaon of
incidental or consequenal damages or exclusions of
implied warranes. Therefore, the limitaons or exclusions
herein may not apply. This warranty gives you specific legal
rights, in addion to other rights which vary from state to
state or country to country.
Make sure that the device is not plugged into the mains
before making any connecons. It is also recommended to
turn off or disconnect all other devices associated while
making connecons to the product.
Connect the speakers to the speaker jacks on the back and
the sources of the corresponding input jacks on the back.
Connect the power cord to the connector on the one hand
AC Mains product and the other to a wall outlet.
Turn the POWER switch (POWER) ON (ON).
.
If the unit is equipped with a standby, then press the
STANDBY buon to turn it on.
Press the input selector for the source you want to hear.
WARNING:
Be sure to turn off the power switch on your
product before making any connecons. Similarly it is best
to cut the power of the other devices you want to connect
to your amplifier.
Be sure to turn off the power on your product before
making any connecons. Similarly it is best to cut the power
of other devices you want to connect to your amplifier.
① INPUTS (INPUT - RCA)
The AUX1, AUX2, TUNER and CD inputs are designed to
connect sources "line level" to your amplifier. These inputs
are designed for so-called "analog" signals (as opposed to
"digital" signals). Compable cables are made with these
type "RCA", they are tradionally idenfied by a color code
"RED" to the RIGHT and "WHITE" channel for the LEFT
channel.
② OUTPUTS (OUTPUT - RCA)
REC
It allows to retrieve the selected amplifier to "source" level
audio signal that is independent of the level volume
control. This output is tradionally used to connect the
amplifier to a recording device.
LINE
It allows to retrieve the selected audio amplifier in
proporon to the level of volume control signal. This output
is mainly used to connect an addional power block to
perform a "bi-amplificaon".
③ DIGITAL
Your amplifier has a built-in digital-to-analog converter.
Therefore it is possible to connect a digital source (such as
most modern television screens).
To ensure compability with all exisng types of digital
terminals, the amplifier has an "opcal" socket and a
"coaxial). However this entry is unique and it is possible to
connect one device at a me.
④ LOUDSEPAKER TERMINALS
Connect the speaker to the terminals marked RIGHT "+ R"
and "R -" ensuring that "R +" is connected to the "+"
terminal of the enclosure and "R -" is connected to the
terminal "- "the same enclosure. Connect the LEFT speaker
to the terminals marked "L +" and "L -" by doing the same.
Basic instrucons
Quick starng guide
Warranty
Connecon to the amplifier
Rear panel
