TX1500 Manual Combined 1Oct03 PSC
Page 14 of 31
Matrix
Enter Pin Number
* * * * * *
+ or - = Enter Key
Joystick to Navigate
Press clear to exit menu
Exit
CONFIGURATION USING THE TX1500 MENUS
The menu system for Tx1500 software version V2.01 is described on the following pages. The menu structure
may differ slightly if using another software version although the navigation method is the same.
Out of the box the Tx1500 is configured to control BBV coaxial telemetry on all cameras and all Keyboards can
control monitors all the monitors. The allows the system to work “out of the box” and any lockout can be added if
required later.
The Tx1500 menu system allows the unit to be configured to your customer’s site requirements.
To prevent potential clashes from occurring only Keyboard 1 can access the Tx1500 system menu and only
Monitor 1 can display the menu.
To access the menu use Keyboard 1 and ensure that monitor 1 is selected by pressed 1 MON. Press and hold
the PROGRAM key for 2-3 seconds and the following screen will be displayed on the MONITOR 1 output.
Press for 2 seconds
The menu is displayed
Enter the six digit PIN using
and the PROGRAM led
keys 0 – 9.
is lit.
The default PIN is 999999
Use the joystick left and right if a digit is entered incorrectly.
The Tx1500 Main Menu is displayed if the PIN is correct otherwise the Tx1500 reverts to normal control.
To navigate through the menu, use the joystick and either the +/-
keys to toggle a value or the numeric keys 0-9 if a value is
required.
To exit the menu press the PROGRAM key at any point.
Each of the menu items will be described on the following pages
PROG RAM
PROG RAM
TX1500 Main Menu
System Basics
Access Tables
Alarm Menus
Sequences
Camera Types
Set Passwords
System Parameters
Exit press + to select
PROG RAM