TX1000 Manual V8 September 2013
3
TX1000 Alarm program table
23
IMPORTANT
Before you install:
Please read the following points before servicing or installing.
Pre-installation checks -
It is recommended that the unit be bench tested prior to installation on the site.
Safety during installation or servicing -
Particular care should be taken to isolate the pan/tilt head in order
to prevent operation while engineering work is being carried out. In addition any ladder or other means of
working on the receiver MUST NOT rest on the pan/tilt head as it is possible for the head to move when not
expected.
Safety check -
Upon completion of any service or repairs to the unit, safety checks should be performed to
ensure that the unit is in proper operating condition.
Coax grounding -
If an outside cable system is connected to the unit, be sure the cable system is
grounded.
Adhere to safety standards -
All normal safety precautions as laid down by British Standards and the
Health and Safety at Work Act should be observed.
WARNING -
TO PREVENT DANGER OF FIRE OR SHOCK, DO NOT EXPOSE THE INTERNAL
COMPONENTS OF THIS EQUIPMENT TO RAIN OR MOISTURE.
Damage requiring service -
Servicing by qualified personnel should be carried out under the following
conditions:
(a) When the power supply cord or plug is damaged;
(b) If liquid has been spilled, or objects have fallen into the unit;
(c) If the unit does not operate normally by following the operating instructions;
(d) If the unit has been dropped or the enclosure is damaged
Replacement parts -
If replacement parts are required, ensure that only replacement parts recommended
by the product manufacturer are used.
