BBT BBT-JD420 Owner'S Manual Download Page 21

21

WWW.BBTA.COM.AU

BBT-JD420

SPECIFICATIONS

Model

BBT-JD420

Length x Width x Height

485 x 410 x 485 mm

Dry weight

25kg

Engine type

4-stroke, 25°inclined, single cylinder Air-cooled

Displacement [Bore x Stroke]

90 x 66

Max. Output (HP/rpm)

15.0/3600

Max. Torque (N.m/rpm)

29.3/2500

Engine oil capacity

1.1 Litres

Fuel tank capacity

6.5 Litres

Fuel consumption (g/HP-hour) 

290

Cooling system

Forced air

Ignition system

Non-contact transistorized ignition (T.C.I.)

Tune-up

ITEM

SPECIFICATION

Spark plug gap

0.028—0.031in (0.70—0.80mm)

Idle speed

1400±150rpm

Valve clearance

IN: 0.15±0.02mm cold, EX:0.20±0.02mm cold

Other Specifications

No other adjustments needed

NOTE: Specifications may vary according to the types and are subject to change without notice.

WARRANTY & SERVICE

Warranties

Bigger Boyz Toyz offer a 1-year parts warranty on all products used for domestic use from the date of purchase. 
For all commercial use, a 3-month parts warranty period applies, unless specified in the item listing. All conditions 
below are based upon the product being faulty or not performing as described. In the instance where a return 
is required, the purchaser is liable for any shipping cost. Warranties will only be determined by a Bigger Boyz 
Toyz Technician upon inspection.

Warranties do not cover accidents, misuse, neglect, natural disaster or act of God or other external causes, or 
damage caused by operating the equipment in a manner that is not described in the instructions. 

Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled 
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality 
and the failure does not amount to a major failure.

Parts purchases, consumable components and accessories such as chains, carry bags, batteries, hoses, grinding 
discs, covers, belts, cable, wheels and blades are not covered by standard warranty.

Spare Parts

Spare parts are available. Please see our website (www.bbta.com.au) or contact us at [email protected] for more 
details.

Summary of Contents for BBT-JD420



























Reviews: