BBT BBT-BC-36CCBH Owner'S Manual Download Page 4

4

WWW.BBTA.COM.AU

BBT-BC-36CCBH, BBT-BC-36CCDH

IMPORTANT SAFETY INFORMATION

Additional Information and Potential Changes

We reserve the right to discontinue, change, and improve our products at any time without notice or obligation 
to the purchaser. The descriptions and sections contained in this manual were in effect at the time of printing. 
Equipment described within this manual may be optional. Some illustrations may not be applicable to your 
machine.

WARNING: Read and thoroughly understand all instructions in this manual and on the safety decals 
before assembling or operating this Brush Cutter. Failure to do so may cause serious injury or death. 
Do not allow anyone to operate this Brush Cutter who has not read this manual. As with all power 
equipment, a Brush Cutter can be dangerous if assembled or used improperly. Do not operate this 
Brush Cutter if you have any questions concerning its safe operation. To get answers to any questions, 
call our Customer Support Department.

This SAFETY ALERT SYMBOL identifies important safety messages in this manual. Failure to follow 
this important safety information may result in serious injury or death.

DANGER! This Brush Cutter was built to be operated according to the safe operation practices in 
this manual. As with any type of power equipment, carelessness or error on the part of the operator 
can result in serious injury. This Brush Cutter is capable of amputating hands and feet and throwing 
debris. Failure to observe the following safety instructions could result in serious injury or death.

The following signals, words and meanings are intended to explain the levels of risk associated with this product.

DANGER indicates a hazardous situation which, if not avoided, will result in serious injury or 
death.

WARNING indicates a hazardous situation which, if not avoided, could result in serious injury 
or death.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or 
moderate injury.

NOTICE is important information about the proper use of your Brush Cutter. Failure to follow 
this instruction could result in damage to your Brush Cutter or property.

Because a trimmer/cutter is a high-speed, fast cutting power tool, special safety precaution must 
be observed to reduce the risk of personal injury. Read this manual carefully. Be familiar with 
the controls and the proper use of the unit. Know how to shut off your Brush Cutter and how to 
unhook a harnessed unit quickly

Summary of Contents for BBT-BC-36CCBH



























Reviews: