SSS3416TC
Owner’s Manual
8
AA
M6 x 15 Bolt
8 PCS
BB
Spring washer
8 PCS
CC
Flat washer
8 PCS
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
Step 3 (Storage basket and storage basket support
assembly)
a) Align the holes on the slide tracks with the holes on the left
of cart base (Q)
b) Screw the M6 x 15 bolts (AA), spring washers (BB) and flat
washers (CC) into the pre-drilled holes of slide tracks, and
then tighten the bolts by hand.
c) Align the holes on the storage basket support (T) with the
holes on the slide tracks.
d) Screw the M6 x 15 bolts (AA), spring washers (BB) flat
washers (CC) into the pre-drilled holes of storage basket
support (T), then tighten all the bolts by hand
e) Place the storage basket (O) on the storage basket support
(T)
f) Go back and tighten all the bolts using screwdriver the
provided.
Step 4 (Front beam assembly)
a) Align the holes on cart left side panel (K) with the holes on
front beam (M).
b) Insert one M6 x 15 bolt (AA), one spring washer (BB) and
one flat washer (CC) into each pre-drilled hole, then
tighten the bolt by hand.
c) Repeat the procedure with hole cart right side panel (S) and
front beam (M)
d) Go back and tighten all bolts using the screwdriver
provided.
Step 5 (Cylinder side support and latch magnet
assembly)
a)
Align the holes on the cylinder side support (V) with
the holes on the right side panel (S).
b)
Insert one M6 x 15 bolt (AA), one spring washer
(BB) and one flat washer (CC) into the each
pre-drilled hole.
c)
Align the holes in the middle edge of cart base with
the holes on the latch magnet (U)
d)
Insert one M6 x 15 bolt (AA), one spring washer
(BB) and one flat washer (CC) into the each
pre-drilled hole.
e)
Tighten all the bolts using the screwdriver provided.
