GSS3219B
Owner’s Manual
9
Step 5 (Bracket assembly)
a) Align the two holes on the bracket
(F) with the two holes on the cart
left side panel.
b) Insert one M4 x 15mm bolt (CC)
with one M4 flat washer (GG) into
each pre-drilled hole. Tighten
bolts by hand until secured.
c) Align the two holes on the bracket
(F) with the two holes on the
bottom assembly.
d) Repeat the procedure b).
e) Align the two holes on the bracket
(X) with the two holes on the cart
right side panel.
f) Repeat the procedure b).
g) Go back and tighten all bolts using
the screwdriver provided.
Step 6 (Door assembly)
a) Insert the bottom pin of left
door (G-1) into the pre-drilled
hole on the cart bottom (A).
b) Push down the top pin of left
door (G-1)
and insert it into
the pre-drilled hole on the
left end of front beam.
c) Repeat the procedure for the
right door (G-2).
d) Close the two doors.
CC
M4X15 Bolt
6 PCS
GG
M4 Flat Washer
6 PCS
