GSS3219A
Instruction Manual
12
Step 16 (Tank clip assembly)
a) Insert the tank clip (U) into the holes on the tank holder.
b) Place the gas tank on the tank holder and clip it using the tank
clip (U).
c) Connect
the
tank with regulator by screwing the regulator
collar onto the tank valve. (See diagram to right.)
d) Conduct
the leak test on page 17 to make certain all
connections are connected securely.
Step 15 (Assemble the electrical wire with
transformer)
a) Open
the
doors.
b) Clip the wire onto the cart left side panel as
shown.
c) Insert the connection plugs into the hole on the
transformer. Then tighten the plastic nut by
hand until secured.
Step 17 (Grease cup & support assembly)
a) Hook the grease cup support (S) into the two
holes on the grease pan.
b) Place the grease cup (T) onto the grease cup
support.
