Before assembly read instructions carefully. Assemble grill on a clean, flat surface. This unit is heavy.
DO NOT ASSEMBLE WITHOUT ASSISTANCE. GET A HELPER!
Tools needed for assembly:
Adjustable Wrench
Philips Head Screwdriver
Assemble grill on a clean, flat surface.
CAUTION:Use
caution
during
the
assembly process.
Be careful when moving grill body,
installed charcoal pan may move.
Some components are heavy.
STEP 1
Pay
close
attention
to
when
assembling grill legs. Left leg (14) is
shorter to accommodate wheels.
Insert left short leg (14) and right long
leg (13) into leg connector (10) as
shown.
STEP 2
Attach leg bracket (11) to short leg
(14) as shown using M6*40
Philips
head screw (B) and M6 nut (E).
Repeat step2 on opposite side.
Do not fully tighten screws at this
time.
'
STEP 9
Attach side shelf brackets long (9)
to below holes in leg brackets as
shown in illustration
and using
M6*40
Philips
head
screws
(B) .Secure using M6 Nuts (E).
Attach side shelf brackets long (9)
to side shelf using M6*12 Philips
head screws (D).
STEP 10
Note: Do not over tighten. Air
damper should move freely.
Attach air damper (18) to body
using M6*12 Philips head screw
(D) and M6 nut (E) as shown.
STEP 11
Align grill lid (3) with grill body as
shown. Secure grill lid (3) to grill
body using M6*20 Philips head
screws (C).
customer service 1-888-577-9820
customer service 1-888-577-9820
Page 9
Page 6
ASSEMBLY INSTRUCTIONS
