Page 4
BBQ-PRO Charcoal Grill Assembly Instructions
STEP 1
: Attach lid vent (F) to lid (A)
by using damper bolt (5), fiber washer (9)
and damper winged nut (6).
Attach handle (J) to lid (A) by using 2
handle bolts (2), 2 metal washers (10)
and 4 fiber washers (9). Screw handle
bolts (2) into handle (J).
STEP 2
: Before attaching the legs make
sure that the bottom bowl (B) is facing in
the proper position. You want to make sure
you place the stationary legs (D) on the
opposite side of the bottom bowl (B)
away from the hinges (L).
See diagram.
Attach stationary legs (D) of grill by
inserting a leg bolt (1) through metal
washer (10), bottom bowl (B), leg bowl (H),
and screwing bolt (1) into stationary
leg (D). Repeat procedure for the other
stationary leg. Hand tighten.
Attach wheel legs (E) of grill by inserting
a leg bolt (1) through metal washer (10),
bottom bowl (B), leg bowl (H), and screwing
bolt (1) into wheel leg (E).
Repeat procedure for the other wheel leg.
Hand tighten.
F
J
H
H
L
D
E
Remove all the parts from the carton
and lay them out on a smooth, clean
surface. Verify the presence of all
parts by comparing to Hardware
and Parts Lists on previous pages.
Do not throw away any of the packaging
until you locate all the parts.
Customer Service-1-877-998-1697
