When the NanoQ arrives from the factory, the setpoint will be 225 deg F +/- 10 deg (all
temperatures reffered to in this user guide are +/- 10 deg F tolerance).
To adjust the setpoint up by 5 deg F, simply press the
UP
key. If you hold the
UP
key down, the value will continue to increment by 5 degrees with each blink of the Utility
LED.
To adjust the setpoint down by 5 deg F, simply press the
D O W N
key. If you hold the
D O W N
key down, the value will continue to decrement by 5 degrees with each blink
of the Utility LED.
To show you that the setpoint is set to the maximum, anytime the setpoint is set to 475
deg F (max temp) the yellow led will blink about once every 2 seconds.
10.1. To Capture a Temperature Setpoint
The setpoint capture feature can be likened to a cruise control set button in that it makes
+*,0&%/-7*$3-&/D,)(&-*&-#/&2,00/3-&-/B7/0)-,0/&0/)8&*3&+*,0&7$-4%&8$)(&-#/0B*B/-/09&&
If
your pit is already at the temperature that you want to cook at, you can easily capture the
setpoint to maintain that temperature. To capture the new setpoint, simply press the
UP
&
D O W N
keys for one second. The White Utility Led will blink off to indicate
this new setting. Ten seconds after your last key press, the white Utility LED will
quickly flicker to show that your setting has been stored. This ensures that the setpoint
#)%&5//3&/3-/0/8&$3&-#/&$3-/03)(&B/B*0+&)38&'$((&5/&E0/B/B5/0/8F&1*0&-#/&3
ext time it is
powered up (or in the event of a power recovery after an interruption).
10.1.1. To Capture a Temperature Setpoint on the way up to 475 degF.
G/-4%&%)+&+*,&')3-&-*&%/-&-#/&%/-7*$3-&-*&HIJ
8/CKL&5,-&8*34-&')3-&-*&8/)(&'$-#&#$--$3C&-#/&
up key multiple times. Heres what to do:
1.
M/-&-#/&%/-7*$3-&-*&NOI&D,$2P(+&5+&1*((*'$3C&-#/&EM/--$3C&)&"/B7/0)-,0/&M/-7*$3-&
*1&NOI&8/CKF&%/2-$*3&5/(*'9&&Q*,&R,%-&#*(8&-#/&
UP
&
D O W N
keys for 5
seconds (three blinks off of the Utility LED). The setpoint is now 475 deg F.
2.
S3&-#/&')+&,7&-*&NOI&8/C&KL&R,%-&')-2#&+*,0&7$-4%&8$)(&$38$2)-*09&&T#/3&$-&$%&)-&-#/&
temperature you want to maintain (350 in this example), just capture the new
setpoint by pressing the
UP
&
D O W N
keys for one second (one blink off
of the Utility LED).
Your setpoint is now set to where you saw the dial indicator at the time of the capture
(350 deg F for this example).
10.2. Restoring a Temperature Setpoint of 225 degF.
To return the NanoQ back to its factory setpoint of 225 deg F, simply hold down the
UP
&
D O W N
keys for 3 seconds until the Utility LED blinks off two times. It will
blink off after one second to show the setpoint capture and will blink off again after 3
seconds to show the restoration of a 225 deg F setpoint. Ten seconds after your last key
press, the white Utility LED will quickly flicker to show that your setting has been
stored. This ensures that the setpoint has been entered in the internal memory and will be
