background image

the supplied Curleez.  These probes are user-replaceable and are available at 

www

.

t

h

e

bbqguru

.

c

om

; 

we recommend having a spare set for unforeseen emergencies. 

 

Important Note: 

Be sure to fully insert your probes into the control.  Push the plug into the connection 
securely until you feel and hear it snap in place.  If you do not plug the probes in 
securely, you may experience sporadic operation or a blinking yellow LED and the 
NanoQ will not control your cooker accurately.  The temperature may also read low 
causing you cooker to get excessively hot. 
 

5

.

Pow

e

r Draft Blow

e

r

s

 

All blowers are equipped with an adjustable damper and an aluminum nozzle.  The 
blower housing is constructed of stainless steel for a clean, durable and long lasting 
finish.   

5.1.Blower Size     

The Standard 4 CFM blower is good for small or medium size grills and smokers.     
The 10 CFM and 25 CFM blowers are good for medium and large grills and smokers.               

5.2.Blower Damper Adjustment 

The adjustable damper can be completely closed to kill the fire, or can be adjusted to a 
small opening for cold smoking (very low temps).   This feature allows the user to make 
fine adjustments on their own grill or smoker due to natural drafts that effect cooking 

-/B7/0)-,0/&8,0$3C&-#/&5(*'/04%&*11&2+2(/9&&"/%-$3C&*3&8$11/0/3-&%/--$3C%&

is recommended. 

Open damper fully for quick start up or grilling at high temperatures.  Close 1/2 way for 
smaller cookers or low and slow cooking.  Close 

!

 of the way for cold smoking.   

 

6

.

K

e

y Op

e

ration 

UP 

 

!

 Indexes the setpoint up in 5 deg F increments. 

D O W N 

 

!

 Indexes the setpoint down in 5 deg F increments. 

UP & D O W N 

+

 for 1 second 

!

 

Captures a new setpoint. 

 

UP & D O W N 

+

 for 3 seconds 

!

 

Resets the setpoint to the factory default of 225 

deg F. 

UP & D O W N 

+

 for 5 seconds 

!

 

Sets the setpoint to 475 deg F. 

 
 

7

.

Pow

e

ring up 

 

Upon applying power, the NanoQ will energize the LEDs in the following sequence: 
 
RED FAN LED > WHITE UTILITY LED > YELLOW ERROR LED  

 

Summary of Contents for Pitminder NanoQ II









Reviews: