Programming manual SCU-series
HB-37500-820-10-12F-EN SCU Programming manual
Page 64 of 252
Status: 19.03.2021
4.3.18. Auto Recovery
SafePLC
2
has an integrated Auto-Recovery function. This function savest he document process of
the open file within a customizable fixed interval (1 to 60 minutes). If the program closes
unexpectedly, e. g. during a power failure or an unexpected crash, the files can be restored. This
SafePLC
2
function saves the doument process in the temporary file directory whose path is
indicated on the tab “User Paths”
. Restarting
SafePLC
2
The crash enables the user to store, to
delete or to skip the autorecovery to make the selection at the next start of
SafePLC
2
. If
SafePLC
2
is closed in the normal way, no data are saved.
Figure 40 Dialog box "Auto-recovery"
Open File
–
This allows to continue the process with the selected recovery file. At the next restart
of
SafePLC
2
other stored recovery files survive.
Delete File
- Delete recovery file and continue program with empty document. If only one recovery
file exists, a next selection is not necessary.
Skip
–
Skips the recovery selection and continues the program with an empty document. Recovery
selection holds files for next start.
