2
BBC Bircher Smart Access,
BBC
Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
✓
✗
✓
3
2
4
1
1
2
6
Contact
4
Mounting the contact profile onto the mounting profile
5
Mounting end caps
Fit the first side of the contact profile flush at both ends of the mounting profile and press it into
the mounting profile, working from the ends towards the centre.
Turn out the end cap at the top.
Prepare the lower end cap:
remove the drainage stud.
Pull the hole over the retainer on the
contact end piece.
Check for a tight fit from the outside.
Turn out the end cap and
position the end cap correctly.
Push the fastening clip
in as far as the stop.
The rubber retainers must engage
fully in the mounting profile.
Tip:
Use a tool to help you to push
the retainers in.
Correct end position.
