1.
Connect the Bazzaz coil harness to the
Bazzaz control unit, and begin to route
the harness along the left hand side of
the bike towards the top of the valve
cover.
2.
Locate the factory number one coil.
3.
Disconnect the factory coil connector
and install the Bazzaz coil connector
inline.
4.
Repeat steps 2-3 for the next to coils
from left to right
7>QUICKSHIFT
(FOR USE WITH Z-FI TC ONLY!)
1.
Measure and note your shift pedal height, so that you may reposition the shift pedal
once complete.
2.
Remove the factory shift rod.
3.
Install the Bazzaz shift switch using one of the supplied allen stud bolts, and tighen.
4.
Begin to install the Bazzaz shift rod. (The shift rod may need to be cut to obtain
original shift pedal height.)
5.
Tighten each lock nut once your desired shift pedal height is obtained.
6>CONNECT
(FOR USE WITH Z-FI TC ONLY!)
6.1
BAZZAZ
FACTORY
