5>CONNECT
5.3
BAZZAZ
FACTORY
1.
Locate the factory three-pin, black
speed connectors, which can be found
near the factory fuel pump connector
(on the left side of the bike).
2.
Disconnect the factory speed
connectors, and connect the Bazzaz
SPEED connectors in-line with the
factory connectors.
5.1
1.
Locate the factory light green neutral
sensor wire, which can be found by
removing the front sprocket cover
(wire is beneath the front sprocket).
2.
Trace the wire up to where it joins
in with the main harness near the
factory speed connector. You will
need to cut back a small portion
of the main harness sheathing to
expose the light green wire. Once
exposed, use a supplied skotchlok
and crimp onto the light green wire.
Now insert the Bazzaz NEUTRAL
connector into the scotchlok.
5.2
BAZZAZ
FACTORY
FACTORY
BAZZAZ
1.
Locate the factory tail light connector,
which can be found in the tail section
under the passenger seat.
2.
Cut back the sheathing of the connector
to expose the red wire of the factory tail
light connector.
3.
Crimp a supplied Scotchlok onto the
exposed red wire and insert the
12V SWITCHED POWER connector into
the Scotchlok.
