background image

Honda GL1800 (2001-2005) Audio Amplifier Installation Instructions

 

This sheet must be read completely to: 

 

1.  Provide assistance/clarification to the  
        installer. 
 
2.  Avoid causing injury to installer, customer, 

end user, or others. 

 
3.  Prevent damage to motorcycle and/or 

accessory. 

 

4. 

Prevent death to customer or other vehicle 
operators

 

Installer:

 Please forward this sheet to the 

customer after reviewing it. 

 

5.  It is virtually impossible for us to be able to 

address every possible situation an installer 
or user will encounter. This requires both to 
exercise due diligence and to apply some 
level of common sense. If you have any 
question or problem during the installation, 
please contact us as necessary. Read the 
instructions completely prior to installation. 
90% of questions we receive could be 
answered simply by reading the instructions 
in their entirety. Phone support will always 
provide the quickest response. 

 

Important Information in our instructions 
will be provided in the following manner: 

 

6. 

SHOP TIP:

 this is information we have 

gathered from hands-on installs or customer 
feedback. 

 

7. 

NOTE:

 important information regarding the 

installation. 

 

8. 

CAUTION:

 failure to follow instructions 

could result in damage to motorcycle and/or 
accessory. 

 

9. 

WARNING:

 failure to follow instructions 

could result in injury or death of operator 
and/or passenger or others. 

 
NOTE: 

10. "Left", "Right", "Front" and "Rear" are 

described from the seated position of the 
bike. 

 
11. Check local laws regarding the use of 

auxiliary lighting. 

 

12. Use of owner’s manual or service manual is 

recommended for installation. 

 

13. If so equipped, place the motorcycle on its 

center stand on solid, level ground. 

 

CAUTION: 

14. Never route wires or install components that 

interfere with the operation of the forks, 
handlebars, brake/clutch levers or any other 
operational function of the motorcycle. 

 
15. When adding electrical accessories, always 

disconnect the battery and properly fuse new 
electronics. 

 

WARNING: 

16. Allow the motorcycle to cool prior to 

installation. 

 
17. When operating engine, allow adequate 

ventilation. 

 

18. Never route wires or install components that 

interfere with the operation of the forks, 
handlebars, brake/clutch levers or any other 
operational function of the motorcycle. 

 

19. Never allow your accessories to cause 

distractions to remove your focus off the 
bikes operation. Never forget that this is a 
high-risk sport - don't make it a higher risk 
when you don't have to.   

 
20. Never allow your accessories to cause 

distractions to others on the road. 

 

Reviews: