![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062038.webp)
8 Description of the device
38
8.6
Connecting terminals
Necessary qualification:
Only specialists with both in-depth knowledge of swimming pool construction and in-depth knowledge of the installation of electrical
and electronic devices may open the Salt Relax POWER or perform the connection work described below!
ATTENTION
To prevent electrostatic discharge damaging the sensitive electronic components when you are performing work on the opened
device:
If possible, earth yourself when working on the opened device.
Avoid touching the electronic components unnecessarily.
NOTE
Observe the permissible maximum currents for the relays for switch outputs 1 to 3 (in total, not more than 4 A).
If higher switching capacities are required, it is essential to interpose suitable circuit breakers!
Block
Designation
Terminal (colour)
A
Cover
1 (green)
5 (violet)
B
Paddle switch
2 (red)
5 (yellow)
C
Tank signal
4 (black)
5 (black)
D
Temperature sensor
1 (red)
2 (yellow)
3 (black)
E
Variable-speed filter
pump
1 Slow
2 Medium
3 Fast
4 Common
F
WIFI
Universal
plug
Block
Designation
Terminal
G
pH Pump
1
2
AUX1
3
4
AUX2
5
6
Grounding
7
8
Filter Pump
9
10
Light
11
12
AUX3
13
14
AUX4
15
16