ASSEMBLY INSTRUCTIONS
5
Carefully assemble this appliance according to these instructions. Inspect contents in the box to ensure all parts are
included and undamaged. Please contact Barbour International, Inc. if any parts appear damaged, missing, or
inaccurate. Proof of purchase will be required.
To Assemble:
1. Remove components from the box and packaging.
Turn round frame upside down as shown for proper
assembly.
2. Mount Burner Support Bar:
Line up holes in support
bar to the holes in the frame. Attach with four short
bolts and four locking nuts. Wrench tighten.
3. Attach Burner and Heat Shield to Support Bar:
Remove locking nut from bottom of burner. Turn burner
upside down and position burner into “U” of support
bar with end of burner turned to the front. Insert
mounting bolt into center hole of bar. Holding burner
in place, position heat shield over bolt. Attach locking
nut and wrench tighten.
NOTE: make sure cutout in round frame (front of
cooker) is turned toward end of burner to avoid
interference.
4. Attach Legs to Round Frame:
Slide legs on frame to
match holes. Insert long bolts and attach with locking
nuts. Hand tighten.
Adjustable
Wrench
Phillips Head
Screwdriver
Parts Included:
Tools Required:
Round Frame
Burner Support Bar
5 PSI Hose Valve
Regulator with Timer
Spring
Air Shutter
(3x) Long
Bolts
(4x) Short
Bolts
(7x) Locking
Nuts
Heat Shield
Poultry Rack with
Lift Hook
Stockpot
with Lid
12-inch
Thermometer
Seasoning
Injector
(3x) Legs
Burner with
Locking Nut
*Parts may vary slightly with each model.
