Bayne THINLINE 1900-0571, Operation And Parts Manual, Page: 21 / 39

Document Number: 1900-0571 Issue Date: 05/21/13 Revision No: 001 Page: 21 of 39
2. Place the plunger ( 2 ) ( fig. S-2 ) into the plunger housing ( 1 ). Place the spring ( 4 ) on
top of the plunger ( 2 ). Coat the o-ring on the o-ring plug ( 9 ) with STP Oil Treatment.
Screw the o-ring plug ( 9 ) into the plunger housing ( 1 ) on top of the spring ( 4 ) and
tighten to 30 in-lb. torque.
figure S-2
3. Coat the o-rings on the plunger housing ( 1 ) ( fig. S-3 ) and the o-ring on the o-ring plug
( 8 ) with STP Oil Treatment. Screw the plunger housing ( 1 ) into the top of the rack cap
( 3 ) ( fig. S-4 ) and torque to 30 in-lb. Screw the o-ring plug ( 8 ) into the side of the rack
cap ( 3 ) in the bottom port and tighten.
figure S-3