Bayne THINLINE 1900-0571, Operation And Parts Manual, Page: 20 / 39

Document Number: 1900-0571 Issue Date: 05/21/13 Revision No: 001 Page: 20 of 39
BAYNE
PREMIUM LIFT SYSTEMS
ASSEMBLY INSTRUCTIONS
SHORT STROKE SLOWDOWN
PART NUMBER 6011-1210 ( WI-2303-A )
LICENSED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
1,327,765 5,308,211 5,333,984
READ INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY.
The Slowdown is a patented device used to cushion the unit as it completes its rotation into
the dump position. This cushioning prevents the tearing of carts and helps protect the dumper
from abuse. The Slowdown is part of the Actuator assembly and is assembled into the rack
cap.
Before starting the assembly of the Slowdown, refer to the exploded parts drawing and parts
list ( fig. S-4 found at the end of these instructions ) to familiarize yourself with the individual
components. Prepare a clean surface in an area free from blowing dust and contaminants in
which to assemble the Slowdown. Be sure that all parts are clean and dry before starting
assembly.
NOTE: All torque values given apply to clean dry threads only. Follow these directions
closely when assembling the Slowdown.
1. Install the housing seal ( 5 ) ( fig. S-1 ) in the groove next to the hexagon head of the
plunger housing ( 1 ). Place the o-ring ( 6 ) and the square backup ring ( 7 ) in the groove
at the end of the plunger housing as shown in figure S-1.
figure S-1