1B-2 - MAINTENANCE
90-823224--2 796
Maintenance Schedule (Continued)
To Be Done by Dealer
NOTE:
Only perform maintenance which applies to your particular power package.
Task
Interval
Seawater Pickup Pump - Disassemble and inspect
Whenever insufficient seawater flow is suspected.
(If operating temperature exceeds normal range.)
Crankcase Oil and Filter Change
E d f fi
b
i
Ignition system - Clean and Inspect condition.
E d f fi
b
i
Flame Arrestor and Crankcase Ventilation Hose -
Clean and Inspect.
E d f fi
b
i
Positive Crankcase Ventilation (PCV) Valve (If So
Equipped) - Change
E d f fi
b
i
Stern Drive unit Oil - Change
E d f fi
b
i
Gimbal Ring Clamping Screws - Retorque to 40 ft.
lb. (54 N·m)
E d f fi
b
i
Rear Engine Mounts - Check torque to 30-40 ft. lb.
(47-54 N·m)
E d f fi
b
i
Gimbal Bearing - Lubricate
E d f fi
b
i
Cooling System - Clean and Inspect
E d f fi
b
i
Engine Alignment - Check
E d f fi
b
i
Engine Coupling Universal Joint Shaft Splines -
Lubricate
End of first boating season
and thereafter,
every100 hours of operation
Steering System - Lubricate and inspect for loose,
damage or missing parts.
every100 hours of operation
or once yearly, whichever
occurs first.
Electrical System - Check for loose or damaged
wiring.
occurs first.
Cooling System Hoses and Clamps - Inspect for
damage and deterioration. Check Clamps for
tightness.
Closed Cooling System Pressure Cap - Clean,
inspect and test .
Continuity Circuit - Check components for loose
connections, broken or frayed wires.
Shift and Throttle Cable and Linkage - Lubricate
and inspect for loose, damaged or missing parts
Engine Exhaust System - Inspect externally for
damage, deterioration and restrictions. Check for
tightness.
Ignition System - Check Timing and adjust as
needed.
