Bayliner Ciera, User Manual

Page: 12 / 52

6 Chapter 2: Components/Systems
3055 EL Ciera Sunbridge • Owner’s Manual Supplement
Deck Equipment
Anchor Windlass (Option)
Your boat may feature an optional anchor windlass. Please
read the manufacturer’s instruction manual supplied in your
boat’s owner’s packet before using the anchor windlass for
the first time.
• The windlass can be controlled from a switch at the helm
or from the deck switches (see illustration to right).
• Verify that the windlass breaker, located under the aft
cockpit entertainment center sink, is activated before using
the anchor windlass.
• To haul the anchor, use engine power (not the windlass) to
move the boat to, and directly above, the anchor. Activate
the windlass to disengage the anchor from the bottom by
pulling it straight up. Do not pull the boat to the anchor
using the windlass or continue to operate the windlass if it
has stalled or is overloaded.
Windshield Wipers
• The windshield wiper switch is located on the helm’s large
switch panel.
• Periodically, due to wear and environmental exposure, you
will need to replace wiper blades using 18” blade refills.
Large Helm Switch Panel
Electrical System
We strongly recommend you thoroughly read and understand this section, the electrical section of the Owner’s
Manual and all accessory manuals included in your boat’s owner’s packet. Wiring schematics are provided in
Appendix A of this supplement; electrical routing illustrations in Appendix B.
WINDLASS
BREAKER
WINDLASS BREAKER LOCATION
ENTERTAINMENT
CENTER SINK
(VIEW OF PORT AFT COCKPIT)
PORT
SPOTLIGHT (OPTION)
WINDLASS
WINDLASS DECK
SWITCHES
ANCHOR WINDLASS LOCATION
(VIEW OF FOREDECK)
EXTREME FIRE, SHOCK & EXPLOSION HAZARD!
• Do not modify the electrical systems or relevant drawings. Only qualified personnel
should install batteries and/or perform electrical system maintenance.
• To minimize the risks of fire and explosion, never install knife switches or other arcing
devices in the fuel compartments. Never substitute automotive parts for marine parts.
Electrical, ignition and fuel system parts were designed and manufactured to comply
with rules and regulations that minimize risks of fire and explosion.
• Insure that all battery switches are in the off position before performing any work in the
engine spaces.
DANGER!
!