Pralinenfix PFM 2000
Starting
Before initial use
l
Remove the packing from the device and check that all parts are complete.
In case of transport damage, see Page: 8 Customer Service
Read instructions for use thoroughly and store in a safe place for subsequent use.
l
All praline machines should be cleaned before use.
Dismantle piston units and container before cleaning.
These parts are dishwasher-proof
See Page: 5 Assembly Fig. 1 - 4
l
Basic Device
Clean the basic device with a moist cloth only.
l
Attention ! Do not immerse the basic device in water or clean under running water
.
l
Set the operating lever from transport position to large quantity
See Page: 6 Settings - Fig. 8
l
Attention ! The operating lever is slightly spring-tensioned.
Press the operating lever downward to set
l
After cleaning the individual parts, prepare the praline machine for operation.
See Page: 5 Assembly Fig. 1- 4
l
Attention !
Ensure that all parts are dry and that
there is no water residue !
Pre-heat the basic device before starting.
l
Attention ! Observe pre-heating period
!
See Page: 1 Technical data
Cleaning and care
Attention
l
Remove mains plug
before cleaning
!
F
Dismantle piston units
( Page: 5 Fig. 1 )
F
Dismantle container
( Page: 5 Fig. 2 )
F
The container and all parts of the piston unit are dishwasher-proof.
Place the cylinder tube and nozzle in the rack in the direction of rinsing.
We recommend a temperature of 70° for cleaning these parts.
Select the appropriate wash program.
F
Do not immerse the basic device in water or clean under running water.
F
Clean the basic device with a moist cloth only.
F
Do not use abrasive or aggressive cleaning agents.
F
Do not use sharp objects to remove dry residue.
F
All parts should be thoroughly dried after cleaning.
F
Spray the inside of the cylinder tube and the nozzle ring slightly
with Palminsoft. (Page: 5 Fig. 1)
F
O rings / Spray rubber parts slightly before assembly e.g. with Palminsoft.
F
Reassemble piston units (
Page: 5 Fig.
1
)
F
Screw vales to container.
( Page: 5 Fig. 2 )
F
Spray valve sleeve slightly e.g. with Palminsoft.
( Page: 5 Fig. 2 )
Page: 4
