background image

28

Need Help?  Call toll free: 1-800-348-8100

Testing

29

www.bayerdiabetes.com/us 

Testing

High and Low Blood Sugar Readings:

 

Your meter has been preset with a hypoglycemic 
(low blood sugar) value of 70 mg/dL and a hyper-
glycemic (high blood sugar) value of 250 mg/dL. 
These are the default values, but can be customized 
by you and/or your healthcare professional using 
the 

GLUCOFACTS

®

 Deluxe software

 on your 

computer. See the GLUCOFACTS Deluxe User 
Guide for assistance.

Low Blood Sugar

If your blood sugar reading is under 70 mg/dL: 

 

 A screen with large 
orange numbers will 
alert you that your blood 
sugar is low.

 

 If AutoLog is on and you were not able to mark 
it before the high or low alert appeared, press 
the 

Notes 

button. You may now select 

 

Before 

Meal

,   

After Meal

 or 

No Mark

 by pressing the 

button next to it.

High Blood Sugar

If your blood sugar reading is over 250 mg/dL:

 

 A screen with large 
orange numbers will 
alert you that your blood 
sugar is high. 

T

est Results

Symptoms of High and Low Blood Sugar

Symptoms of High and Low Blood Sugar: 

You can better understand your test results by 
being aware of the symptoms of high or low blood 
sugar; this will also help you decide what to do if 
your results seem unusual. 

Some of the most common symptoms are:

1

High blood sugar  
(Hyperglycemia):

 

 frequent urination 

 excessive thirst 

 blurred vision 

 increased fatigue 

 extreme hunger 

 irritability

Ketones (Ketoacidosis):

 

  shortness of breath 

  nausea and vomiting 

  very dry mouth 

CAUTION:

 

Blood sugar levels below 

50 mg/dL or above 250 mg/dL may indicate 
a potentially serious medical condition. 
If your test result is below 50 mg/dL or 
above 250 mg/dL, consult a healthcare 
professional immediately.

For additional information and a complete list of 
symptoms, contact your healthcare professional 
or refer to the website for the American Diabetes 
Association: www.diabetes.org

Low blood sugar  
(Hypoglycemia):

 

 shakiness 

 sweating 

 fast heartbeat 

 blurred vision 

 confusion 

 passing out 

 seizure

Summary of Contents for CONTOUR



































Reviews: