TESTING
28
®
Apply Blood
Contr
ol Solution T
esting
3.
Insert the grey square
end of the test strip
into the test strip port
until the meter beeps.
4.
The meter will turn on and show a
test strip with a flashing blood drop.
6.
Remove the bottle cap and use a tissue to wipe away any
solution around the bottle tip before dispensing a drop.
7.
Squeeze a small drop of solution onto a clean
nonabsorbent surface.
Do not apply control solution to your fingertip or to the
test strip directly from the bottle.
8.
Immediately touch the tip of the test strip to the drop of
control solution.
9. Hold the tip in the drop
until the meter beeps.
1.
Remove the test strip from the bottle and firmly snap the
lid closed.
2.
Hold the test strip with the grey square end facing up.
5.
Shake the control solution bottle well, about
15 times before every use.
84671533_CntrNEXT_UG_EN_FpBp_v0.indd 28
4671533_CntrNEXT_UG_EN_FpBp_v0.indd 28
4/15/15 12:50 PM
4/15/15 12:50 PM