TESTING
18
®
TESTING
19
www.bayerdiabetes.com/us
Need Help? Call toll free: 1.800.348.8100 (available 24 hours a day, 7 days a week)
APPLY BLOOD
STRIP UNDERFILLED
APPLY MORE BLOOD NOW
OK
Too Little Blood
Remove used strip.
Repeat test with
new strip.
EXX
a
b
Removing the Used Lancet
Getting the Blood Dr
op – Fingertip
T
esting
Press any button and the
Apply Blood
screen will
become active again.
After a total of 3 minutes of inactivity the meter
turns off.
If the first blood drop is
not enough, the meter
may beep twice and
display a
STRIP UNDERFILLED
screen image.
You have about 30 seconds to apply more blood
onto the same strip.
If you are not able to
apply enough blood
within that time, discard
that strip and start over
with a new strip.
Follow the instructions on
the meter screen.
Removing the Used Lancet
1.
In one hand, hold the
lancing device with
your thumb on the
grip indent, with your
other hand, hold the
gray endcap dial as
shown, and gently
snap off the endcap.
5.
Dispose of the used lancet as medical waste.
Do not reuse lancets. Use a new M
ICROLET
®
lancet
each time you test.
2.
Place the round
protective lancet cap
on a flat surface with
the Bayer logo facing
down.
4.
While pressing the
release button (
a
), pull
the re-setting handle
(
b
), and the lancet
will drop into the
container you have
selected.
3.
With the used lancet still in the lancing device, push
the lancet needle completely into the middle of the
exposed side of the cap.
84359751_CntrNextLINK_UG_EN_FpBp_v4.indd 18-19
84359751_CntrNextLINK_UG_EN_FpBp_v4.indd 18-19
3/29/12 12:19 PM
3/29/12 12:19 PM