Options
30
Need Help ? Bayer Diabetes Care: 1-800-348-8100
(available 24 hours a day, 7 days a week)
Options
31
www.bayerdiabetes.com/us
When the alarm sounds,
the meter will auto-
matically turn on, the
alarm will sound, and
the display will show the
pre-meal test result you
marked when you set the
alarm. Pressing any but-
ton will silence the alarm.
You can now run another test by placing a test strip in the
test strip port and following the testing instructions
(page 8).
When you have completed this
test and the result is shown on
the display, you may want to
mark this test with the
symbol
to identify this test result as your
post-meal result.
If you do not want to run another test immediately after the
alarm sounds, press any button to turn your meter off.
The meter will only set one alarm. It will remember the last
alarm set. Any previous alarm setting will be lost.
Test Reminder Alarm:
To Cancel a Test Reminder Alarm:
Press
M
to enter the
meter memory. The 14
day average will appear
along with the
.
Press
M
again and a box
will appear and flash
around the
.
Press
or
. The empty box (
) will now indicate the
alarm has been turned off.
Press
M
to set.
For example:
An alarm has been set. You decide to re-
test before that alarm goes off. If you mark the new test
result with a pre-meal marker
(
)
and set a new alarm
(
),
the old alarm setting will be ignored and only the new
setting will sound in 2 hours (or in the time you selected in
the Setup mode).
Using the Markers and
Test Reminder Alarm
Using the Markers and
Test Reminder Alarm
84378888_CntrLINK_UG_EN_FpBp_v3.indd 30-31
84378888_CntrLINK_UG_EN_FpBp_v3.indd 30-31
3/30/12 11:58 AM
3/30/12 11:58 AM