Digital Audio Baby Monitor
EN
14
Attention:
For safety reasons, the parent unit A
1
when powered from an external power source can only be put
into operation with rechargeable batteries inserted inside.
–
In the event that the parent unit A
1
was turned off manually after the batteries were inserted or after
being connected to a power socket, it is necessary to press the On/Off button C
6
and hold it down
for approximately 2 seconds to turn it on again.
–
Turn off the parent unit A
1
by again pressing the On/Off button C
6
and holding it down for
approximately 2 seconds. The turned off state of the parent unit A
1
is signalled by the LED indicator
B
1
turning off.
■
Language settings
–
To set the language in which information is to be shown on the LCD display C
3
, perform the
following procedure. To display the main MENU, press button C
5
. The text "language" will appear
on the display C
3
. To display the language menu, press button C
5
. The text "English" will appear
on the display. Available languages are as follows: English, German, French, Italian, Spanish and
Portuguese. To scroll through the individual languages in the menu, use buttons C
4
and C
7
. To
confi rm the language selection, press button C
5
. Confi rmation will appear on the display C
3
for
a short time and the display C
3
will switch back to the air temperature display mode.
■
Setting the volume, turning audio on and off
–
Buttons C
4
and C
7
can be used to increase and decrease the volume on the parent unit A
1
.
Volume can be set to 5 levels. The text "Volume" and the number on the LCD display C
3
indicate
the set volume level. Pressing button C
4
or C
7
is accompanied by a confi rmation acoustic signal
and LED indicator C
2
is lit for a short time. The maximum volume setting is indicated by both volume
LED indicators C
2
being lit for a short time. If the setting is outside the possible volume range,
a sound alert will be made when button C
4
or C
7
is pressed.
–
To turn off the sound on the parent unit A
1
, keep pressing button C
7
until the message "Volume Off"
appears. This text will turn off after a short time and the display C
3
will switch to the air temperature
display mode. Turned off volume is signalled by the symbol D
4
being shown on the display C
3
.
–
To turn on the volume, press button C
4
and set the required volume level.
Summary of Contents for BBM 7010
Page 2: ...EN 3 CZ 23 SK 43 HU 63 ...
