Bay Tek Games SWISH Service Manual Download Page 24

Page: 24 / 33

POWER SUPPLY DIAGNOSTICS

Turn power OFF. Disconnect all 12 volt

output wires only. Turn power ON.

Green LED Light

comes ON.

Green LED Light

remains OFF.

Replace

Power

Supply.

Turn power OFF. Unplug all outputs from the Main Board.

Reconnect the 12 volt output wires to the Power Supply. Turn

power ON.

Green LED Light

comes ON.

Green LED Light

remains OFF.

Turn power OFF. Re-

connect the outputs at

the Main Circuit Board

one at a time. Wait 1

minute between tests

to turn power ON.

Green LED Light

comes ON.

Green LED Light

remains OFF.

That cable or related compo-

nent is shorted out. See

Jumper Cable Pin-Outs to see

which component might be at

fault.

Short in Main

Board - Replace.

That cable is OK.

Green LED Light

dims.

A related component such as

a solenoid is causing an over-

load. See Jumper Cable Pin-

Outs beginning on page 16 to

see which component might

be at fault.

Diagnose Power Supply

Power Supply is located under carpet inside game.

Please refer to “How to Access Blower” for informa-

tion.

Check the small green LED light on the power supply

circuit board. If the light is out there is a short

somewhere. If the light dims, there is an overload in

one of the circuits.

Green LED

power indicator

and voltage

adjustment pot

Summary of Contents for SWISH


































Search results

Summary of Contents for SWISH

Reviews:

Related manuals for SWISH

Brands by name

Popular brands

Bay Tek Games SWISH, Service Manual

Search results

Summary of Contents for SWISH

Reviews:

Related manuals for SWISH

Brands by name

Popular brands