Bay Tek Games SiNK iT SHOOTOUT, Service Manual

Page: 37 / 47

37
HOW TO: ACCESS MAINBOARD/ MOTOR/ BALL SENSOR
17
Unlock 2 top locks and flip open
front panel.
Slide “Bounce Pad” out
toward front of game.
To Remove Motor:
Remove 4 screws from center of wood wheel.
Motor can now be unscrewed and removed from game.
Motherboard, Power Supply, Minigen board and Communication board are now accessible.
To Remove Ball Trough Sensor:
Remove 2 screws from brackets on both sides of
the cabinet and remove carpeted wood platform.
Remove screws from brackets holding vertical
wood that sensor is mounted to.
Lift wood out of cabinet, unplug sensor,
and remove sensor.