Bay Tek Games SiNK iT SHOOTOUT, Service Manual

Page: 33 / 47

33
TROUBLESHOOTING GUIDE
13
Tickets on
monitor does
not match
tickets coming
out of game.
Opto Sensor on ticket
dispenser dirty.
Faulty ticket dispenser.
Notch on tickets cut too
shallow.
Faulty cable. Disconnected,
loose or broken wires.
Faulty Main Board.
Blow dust from sensor and clean with
isopropyl alcohol.
Replace with working dispenser to isolate the
problem. (A5TD1)
Flip tickets and load upside-down to have large
cut notch toward opto sensor.
Check connectors from ticket dispensers to
MiniGen board. Check for continuity.
Cables AACE2025
Replace MiniGen board
(AANEWGEN1-PJ/RBN)
Tickets on
monitor does
match tickets
coming out of
game.
Settings in Menu are
incorrect.
Camera not seeing ball
correctly.
Enter Menu and check certain areas:
Divide Tickets By 2
Ticket Patterns
H2H-Winner extra tickets
Refer to “Ball Scores incorrectly” section.
Tickets do
not dispense
or Wrong
amount
dispensed.
Make sure
Dip # 1 ON
on Minigen
Check for the
correct
amount of
tickets show-
ing on
Monitor
Low Tickets
message on
monitor
Tickets are empty in ticket tray
Faulty cable. Disconnected,
loose or broken wires.
Faulty low ticket switch.
Faulty MiniGen Board
Load tickets into tray. Ensure tickets hold down micro
switch wire.
Check connectors from low ticket switches to MiniGen
board. Check for continuity. (AACE2025)
Inspect switch and replace if needed. (AASW200)
Replace Minigen Board. (AANEWGEN1-PJ/RBN)
Head to Head
Linking
Issues
Ensure Machine ID is set to different values:
One game must be set to “Left”
Other game must be set to “Right”
Two LED’s will flash when communication
is established.
If not flashing when connected, problem may be:
- USB cable to Link Board (part # A5CORD14)
- Link Board (part # AACB0232)
- Comm cable to other game (AACE3225 or AACE3326)
If flashing when connected, then the problem is in these menu selections of either
game.
Games are linked using a USB cable from the motherboard to a
Link Board (part # AACB0232)
A cable (AACE3325) will then be connected to the next game.
It will connect to cable # AACE3326 from other game.