Bay Tek Games Big Bass Wheel, Service Manual

Page: 45 / 74

TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE REMEDY
MONITOR
NOT
WORKING.
FIRST TRY:
POWER
DOWN,
WAIT 10
SECONDS,
AND
POWER UP
AGAIN.
MONITOR
HAS
NOTHING AT
ALL AFTER
POWER UP.
A. POWER CABLE UNPLUGGED FROM
THE MONITOR.
B. FAULTY MONITOR.
A. ENSURE POWER IS PLUGGED INTO THE
BACK OF THE MONITOR DOWN TO THE
POWER STRIP.
B. REPLACE MONITOR (A5CBDI030).
ERROR ON
SCREEN
AFTER
POWER UP.
(RE-BOOT
GAME TO
SEE IF THE
PROBLEM
REPEATS.)
A. DISPLAY STOPS AT "NO BOOTABLE
DEVICE--INSERT BOOT DISK AND
PRESS ANY KEY".
B. DISPLAY SHOWS "PUPPY VIDEO
WIZARD" OR "Xorg".
C. DISPLAY SHOWS "KERNEL PANIC-
UNABLE TO MOUNT ROOT".
A. FLASH DRIVE UNPLUGGED OR FAULTY.
B. GAME IS NOT RECOGNIZING MONITOR.
ENSURE VGA CABLE IS SECURE TO THE I/O
BOARD. REPLACE MONITOR (A5CBDI030).
C. FAULTY OR LOOSE RAM.
MONITOR
DISPLAY,
"NO
SIGNAL"
FOR 5
SECONDS
AFTER
POWER UP,
THEN
DARK.
A. SMALL 12 VOLT POWER CONNECTOR UNPLUGGED ON MAIN BOARD.
B. MONITOR VGA CABLE UNPLUGGED.
C. LARGE POWER CONNECTOR UNPLUGGED ON MAIN BOARD.
D. FAULTY OR LOOSE RAM.
E. FAULTY POWER SUPPLY-CHECK FOR 12 VOLTS AND GREEN LED ON MAIN BOARD.
CHECK FOR THE FAN SPINNING.
F. FAULTY MAIN BOARD-REPLACE BOARD.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 45