23
POWER SUPPLY DIAGNOSTICS
Turn power OFF. Disconnect all 12 volt
output wires only. Turn power ON.
Green LED Light
comes ON.
Green LED Light
remains OFF.
Replace Power
Supply.
Turn power OFF. Unplug all outputs from Main Circuit Board. Re-
connect the 12 volt output wires to the Power Supply. Turn power
ON.
Green LED Light
comes ON.
Green LED Light
remains OFF.
Turn power OFF. Re-
connect the outputs at
the Main Circuit Board
one at a time. Wait 3
minutes between tests
to turn power ON.
Green LED Light
comes ON.
Green LED Light
remains OFF.
That cable or related compo-
nent is shorted out. See
Jumper Cable Pin-Outs to see
which component might be at
fault.
Short in Main
Board - Replace.
That cable is OK.
Green LED Light
dims.
A related component such as
a motor is causing an over-
load. See Cable Pin-Outs in
manual to see which compo-
nent might be at fault.
LIGHT
Power Supply—Part # A5PS1001
12 Volt DC Out
DIAGNOSE POWER SUPPLY
Check the small green LED light on the power supply
circuit board. If the light is out there is a short some-
where. If the light dims, there is an overload in one of
the circuits such as a bad motor.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +561.391.7200
